Today we will talk about the car installation car Windows and doors decorative strip is good, the installation method and installation after the completion of the need to do to ensure that it is completely glued to it.

Window trim is a decorative and windscreen fitting mounted on the edges of the car window. The material is made of stainless steel, usually sequins. Production process is to first use the lathe to cut it down, and then to use the punch machine to repair the edge, I will seam the edge edge mo flat wear garden.

Installation of window trim: generally, the inner groove of the window to be installed with window trim shall be cleaned with alcohol. After five minutes of alcohol volatilizing, 3M adhesive shall be torn off and stuck to the edge of the window. Sometimes, the window trim with 3M adhesive shall be inserted into the groove of window trim and glued to death.

Clean window frames. The surface of stickup car window frame must keep cleanness and dry, usable when general cleanness has added good alcohol or car special cleaner tries to swab, wipe clean hind reoccupy wet cloth is wiped a few times, wait for natural air.

Before the strip is pasted, it shall be placed on the part to be installed and adjusted. After the corresponding installation position is determined, the protective film with viscose shall be torn off for pasting. When tearing the protective film, the contact between fingers and the adhesive surface shall be avoided.

When pasting decorative glitter, press hard several times and hold for 5-10 minutes to make sure the surface is fully touched and moistened. Remember to press the process do not let go, otherwise it will affect the paste effect. Paste decorative strip try to choose a higher temperature at noon, the surrounding environment as far as possible more dry, so that the paste effect will be better. Finally, completely adhere to the surface before tearing the protective film.